Measuring Your Weight Using The Nfc Function - AND UC-324NFC Bedienungsanleitung

Measuring Your Weight Using the NFC Function

After measurement, the communication device receives the data.
1. Confirm that the scale is turned off.
Step on the scale gently and stand still
during the measurement. The scale turns
on, displays all of the display segments.
2. Wait for the measurement to complete.
The process of the measurement is
displayed with segment " ".
3. Step off the scale when the stable symbol
is displayed with three beeps.
If you do not step off the scale,
the scale beeps once every two
seconds and the scale turns off
after two minutes.
4. The scale displays all of the display segments.
Do not step on the scale.
5. The measurement result is displayed.
6. Hold the communication symbol of the NFC-enabled
device close to the communication area ( ) of the scale.
7. When the personal data transmission is complete,
the scale displays "end".
Notes
The NFC-enabled device may not be recognized when it is slanted or placed out of
the communication area. If "
After the measurement result is displayed about three minutes, the scale will
automatically turn off. When the number of measurements to store in memory is set
to 0, the result will be deleted.
When the data transmission is performed while the result is displayed, only the
current result will be transmitted.
Measurement
Stable symbol
" or " " appears, start from step 6 again.
English 7
Turn off
Step on the scale.
in progress
Step off the scale.