Using Your Appliance - Moulinex Ovatio 3 Duo Super Maxipress A ATF Bedienungsanleitung

The wire which is coloured BLUE must be
connected to the terminal which is marked
with the letter 'N' or coloured black. The wire
which is coloured BROWN must be connected
to the terminal which is marked with the letter
'L' or coloured red.
This appliance is manufactured to conform to
the Low Voltage Electrical Equipment (Safety)
Regulations 1989 and is designed to comply
with BS 3456. It complies with the requirements
of the EEC Directive (89/336/EEC).
Any connection error will render the
guarantee null and void.
- Your appliance is intended solely for
domestic use and within the home.
- Unplug your appliance as soon as you have
finished using it and when you are cleaning
it.
- Never use your appliance if it is not working
correctly or if it has been damaged. If this
happens, contact an approved Moulinex
service centre (see list in service booklet).
- Any intervention other than cleaning and
normal maintenance by the customer must
be carried out by an approved Moulinex
service centre (see list in service booklet).
- Do not place the appliance, the power cable
or the plug under running water or in any
other liquid.
- Do not allow the power cable to hang down
within reach of children.
- The power cable must never be close to a
heat source or resting on sharp edges.
- If the power cable or the plug are damaged,
do not use the appliance. To avoid any risk,
these must be replaced by an approved
Moulinex service centre (see list in service
booklet).
- For your own safety, use only Moulinex
accessories and spare parts which are
suitable for your appliance.
- Always use the pushers to guide the food
in the feeder tubes, never use your fingers,
nor a fork, a spoon, a knife or any utensil.
- Only remove the accessories when the
appliance has come to a complete stop.
- Do not introduce any utensil (spoon,
spatula...) by the feeder tube.
- Use the accessories one at a time.
- Handle the metal blade and discs with great
care: they are extremely sharp.
- You must remove the blades (D) and
spindle (C) before emptying the bowl of its
content.
- Never touch the parts when they are moving.
- Do not run your appliance empty.

Using your appliance

- Plug the appliance in.
- Pulse (intermittent speed): press the button
(A6) using successive pulses to give you
better control when preparing certain foods.
- Continuous operation: switch the On/Off
button (A7) to position "I".
- Stop: switch the On/Off button (A7) to
position "0".
- Speed selector (A5): choose the speed
indicated or vary the speed during
processing.
- Using the lower power outlet: the upper
1
power outlet hood (A1) must be locked.
- Using the upper power outlet: make sure
that no accessories are locked on the lower
power outlet.
The functions of your food
processor
. A /
SSEMBLING
2
The bowl is used with the following accessories
(depending on model):
. blades (D), discs (E), whisk (F), emulsifying
disc (G), citrus press (H), juice extractor (J),
«Maxipress» (L).
- Place the drive (B3a) on the bowl.
- Lock the drive (B3a) with the nut (B3b) as
far as it will go.
- Dismantle the bowl assembly and clean it
after each use.
M I X I N G / B L E N D I N G / C H O P P I N G /
3
KNEADING
A
CCESSORIES USED
- Bowl assembly (B), spindle (C) and blades
(D):
. metal blade (D1) for mixing, chopping, and
kneading.
. plastic kneading blade (D2) for kneading or
mixing.
F
ITTING THE ACCESSORIES
- Check that the upper power outlet hood is
locked (A1).
- Place the bowl (B3) on the lower power outlet
(A3). Lock it into place using the handle.
- Place the spindle (C) on the bowl drive.
- Slide the metal blade (D1) or plastic kneading
blade (D2) on to the spindle (C), down to
the bottom of the bowl.
14
DISMANTLING THE BOWL
(
DEPENDING ON MODEL
(B3)
)