Clatronic dvd 797 Bedienungsanleitung Seite 42

Themen Playing media
Starting the replay
Interrupting the replay
Changing Audio-Language/
Audio-Mode
Showing subtitles
Stopping the replay
Selecting previous chapter/track
Selecting next chapter/track
Selecting track directly
Accessing a section via menu
42
05-DVD 797_GB.indd 42 05-DVD 797_GB.indd 42
1. Place the CD/DVD on the CD/DVD-tray ➯ Page 4 , „Loading a CD/DVD".
2. Press the „ " button (Fig. 3/17) on the remote control.
NOTE:
If the replay does not start or the replay is of poor quality, you should check the
default settings of the DVD-Player.
1. Press the „II" button (Fig. 3/18) on the remote control. The replay is inter-
rupted, the currently visible image is „frozen".
2. Press the „ " button (Fig. 3/17) on the remote control to restart the „normal"
replay.
Press the LANGUAGE button (Fig. 3/30) several times to change the Audio
language. The available audio languages depend on the DVD.
Press the SUBTITLE button (Fig. 3/31) to display the current subtitle status. Press
the button several times if you would like to activate or deactivate the subtitle func-
tion or if you want to choose a different subtitle language. The available subtitle
languages depend on the DVD.
Press the STOP button (Fig. 3/19) during replay. The replay stops.
Press the „ " button (Fig. 3/17) again, to continue the replay from the last
position.
Press the STOP button (Fig. 3/19) twice to stop the replay completely. Press
the „ " button (Fig. 3/17) again, to replay the CD/DVD from the beginning.
Press the „I " button (Fig. 3/11) to jump to the start of the previous chapter or
track.
Press the „ I" button (Fig. 3/10) to jump to the start of the next chapter or track.
Enter the number of the desired chapter/track with the Numerical Buttons on the
remote control (Fig. 3/3).
Replay of the chapter/track starts after a short while.
The on-screen menu enables comfortable access to any sections of a medium.
To do this, proceed as follows:
1. Press the GOTO button (Fig. 3/8). The menu appears on the screen.
2. Use the Cursor Buttons (Fig.
3. Now move to the point from which the replay should start. Depending on the
type of medium this may be a track number, a chapter or even a point in time.
The input must be made with the Numerical Buttons (Fig. 3/3). Then press
the ENTER button (Fig. 3/13).
1
3/20) to select the desired option.
18.08.2008 15:58:22 Uhr 18.08.2008 15:58:22 Uhr