Setting The Limits During Operation - Kübler TR 2002 Bedienungsanleitung

5.2

Setting the Limits during Operation

While the display shows a limit value, its set value can be
changed!
Note: The key lock "Key" should not be enabled.
Section 3.5
Limit 1 is displayed. LED 'Pr1' is lighted.
Set limit 1:
Display
Limit 2 is displayed. LED 'Pr2' is lighted.
Set limit 2:
Display
After 4s the display reverts automatically to the instantaneous
value display.
Fritz Kübler GmbH
Zähl- und Sensortechnik
P.O. Box 3440
D-78023 VS-Schwenningen
34
9
Action
= Select digit and
= Set digit.
Example: 300.0
= Enter and switch over to limit 2.
Action
= Select digit and
= Set digit.
Example: 800.0
= Enter
Tel. +49 (0) 77 20 / 39 03-0
Fax +49 (0) 77 20 / 2 15 64
info@kuebler-gmbh.de
www.kuebler-gmbh.de