Kübler TR 2002 Bedienungsanleitung Seite 54

4.2.4 Input range –100 .. +100 mV, bipolar
Menu
4.2.4.1 Decimal point for displayed value
Menu
The decimal point setting is only for optical appraisal. It influ-
ences neither the measuring accuracy nor the actual resolu-
tion. I.e. for example, shifting 2 digits left results in a display in
unit of hundreds.
After the decimal point is setup, the leading zeros will be
suppressed.
4.2.4.2 Changing the range limits
The given limits for the input range can be entered as is, or
adjusted.
When under or overloaded the display alternates between
the measured value and alarm.
The settings must be within the range (e.g. no values
>100.00 mV or no negative values in the range 0 .. 100 mV).
A continuation of setup with the key
the setup is correct.
20
Selection Enter
Selection Enter
0.0
0.00
0.000
0.0000
0
is only possible when