Care And Service - Kärcher LM 530/36 Bp Originalbetriebsanleitung

1. Install the grass bag, the side ejector or mulch plug
(see Chapter Initial startup).
2. Set the cutting height using the cutting height adjust-
ment lever.
Illustration L
Choose the cutting height according to the condi-
tion, length and density of the grass (see Chapter
General information on handling the lawnmower).
3. Press the lever ON/OFF.
Illustration M
4. Press the start button. Keep the lever ON/OFF
pressed.
The device starts.
Empty the grass bag regularly when using the grass
catcher, otherwise the ejection chute can become
clogged with cut grass (see Chapter Emptying the
grass bag).
Push Assist function
The Push Assist function activates the device's self-
driving function.
The ON/OFF lever is pressed.
1. Press the Push Assist lever.
Illustration N
The Push Assist function is activated. The device
moves forwards without having to be pushed by the
operator.
2. Set the speed at which the device should move for-
ward on the speed control slider.
Illustration O
3. Release the Push Assist lever.
Illustration P
The Push Assist function is deactivated. The device
continues to mow, however it must be pushed by the
operator.
Interrupting operation
1. Release the ON/OFF lever.
Illustration Q
The motor stops.
Emptying the grass bag
1. Remove the grass bag.
Illustration R
Take care to ensure that the motor control cable re-
mains in the cable holder when removing the grass
bag.
2. Empty the grass bag.
Remove the security key
Before removing the battery packs, the safety key must
be removed.
1. Pull the security key out of the device.
Illustration S
Removing the battery pack
Note
During longer work breaks, remove the battery pack
from the device and secure it against unauthorised use.
1. Pull the battery pack unlocking button in the direc-
tion of the battery pack.
Illustration T
2. Press the battery pack unlocking button to unlock
the battery pack.
3. Remove the battery pack from the device.
Ending operation
1. Remove the battery pack from the device (see
Chapter Removing the battery pack).
22
2. Clean the device (see Chapter Cleaning the de-
vice).
WARNING
Sharp blade
Incision injuries
Be careful when tipping or lifting the device.
Keep all parts of your body away from the cutting blade.
1. Switch the device off (see Chapter Interrupting op-
eration).
2. Ensure that the blade is no longer rotating.
3. Allow the device to cool down.
4. Remove the safety key.
5. Remove the battery pack (see Chapter Removing
the battery pack).
6. Secure the device against slipping and tipping over
when transporting in vehicles.
Clean the device before storing (see Chapter Cleaning
the device).
1. Remove the safety key.
2. Remove the battery pack (see Chapter Removing
the battery pack).
3. Unlock the handle locks.
Illustration U
4. Push the telescopic handle in completely.
5. Lock the handle locks.
6. Release the quick-release catches and fold down
the handle.
Illustration V
7. Store the device in a dry, well ventilated location.
Keep away from corrosive substances such as gar-
den chemicals and defrosting salt. Do not store the
device outdoors.

Care and service

WARNING
Sharp blade
Incision injuries
Be careful when tipping or lifting the device.
Keep all parts of your body away from the cutting blade.
Cleaning the device
1. Remove the safety key.
2. Remove the battery pack (see Chapter Removing
the battery pack).
3. Clean the exterior of the device with a soft, damp
cloth or brush each time after use.
Illustration W
Clean the blade before longer storage periods.
4. Tip the device onto the side.
Illustration X
5. Clean the blade and the underside of the device us-
ing a brush.
Illustration Y
Removing blockages
WARNING
Removing blockages
Incision injuries from the sharp blade or sharp-edged
objects
Wear protective gloves when checking for blockages or
removing blockages.
1. Switch the device off and wait until the blade comes
to a standstill.
2. Remove the safety key.
English
Transport
Storage