Parkside PHPA 3.6 A1 Originalbetriebsanleitung Seite 64

■ Do not misuse the power cord, e.g. to carry or hang up the
appliance, or to pull the plug from the socket. Keep cord
away from heat, oil, sharp edges or moving parts. If the power
cord is damaged or severed during work, do not touch the cord
but rather pull out the power plug. Damaged or entangled cords
increase the risk of electric shock.
■ To avoid potential risks, if the appliance power cable is dam-
aged, it must be replaced by the manufacturer, its customer
service or by a qualified technician.
■ Only for indoor use.
■ If you take a break of longer than 30 minutes, pull out the power
plug.
■ Allow the appliance to cool completely after use and before
storage.
■ Do not work on any material containing asbestos.
■ Avoid the risk of injury or fire as well as health risks: Risk of
burns! The temperature of nozzle reach a temperature of around
170°C. The temperature of adhesive reach a temperature of
around 170°C. Do not touch the nozzle or the glue. Do not
allow hot glue to come into contact with people or animals. In
case of contact with skin, rinse the affected part in cold running
water for a few minutes. Do not attempt to remove the adhesive
from the skin.
■ Always route the power cord towards the rear, away from the
appliance.
PHPA 3.6 A1
│ │
61
GB MT
■