Safety Instructions - Dentsply Sirona VDW 6:1 Gebrauchsanweisung

2 Safety instructions

Obligations of the user
Preventing the spread of infections and
cross contamination
Instrument head overheating
Malfunction or damage
Repair
Spare and accessory parts
First aid measures in the case of
lubricant accidents
Operating conditions:
6
2
Safety instructions
● Use only fault-free materials that do not deviate from the specified
data [→ 7].
● Protect yourself, patients, and others from danger. To do this,
observe the safety information.
● Comply with the Intended use of the equipment.
● You should always keep these operating instructions within reach for
further reference.
Prevent the spread of infections and cross contamination between
patients, users, and third parties. Sterilize equipment after each patient.
Take the appropriate hygiene measures, e.g. wear protective gloves.
If the instrument is defective, the area around the instrument head may
heat up, thus creating a risk of burning the patient's oral mucosa.
Discontinue use immediately in case of malfunction, unusual or different
sounds or damage. Damaged instruments may cause injury. Notify the
dental depot or the manufacturer.
Do not repair the instrument yourself.
Use only original parts produced by the manufacturer.
General information:
After inhalation:
After skin contact:
After eye contact:
After swallowing:
For details download the Dentsply Sirona T1 Spray Material Safety Data
Sheet from the Dentsply Sirona homepage: www.dentsplysirona.com
Temperature: +10 °C – +35 °C.
If you have any questions, please contact your dental supplies
distributor or the manufacturer.
Instructions for use VDW 6:1
Immediately remove any clothing soiled
by the product.
Supply fresh air; consult doctor in case
of complaints.
If skin irritation continues, consult a doc-
tor.
Rinse opened eye for several minutes
under running water.
If symptoms persist consult doctor.
D3451.201.04.07.02 07.2019
Dentsply Sirona
61 34 378 D3451