Settings; Setting Water Hardness; Setting Coffee Temperature - Krups ESPRESSERIA AUTOMATIC Bedienungsanleitung

Connect the appliance Lift the cup grid by
pressing on the back to
to the mains power
make it tilt.
supply but do not turn
it on.
Appliances are
pre-set in the factory
for hardness level 3.
Appliances are
pre-set in the factory
to 2, average
temperature.
Press the steam key to
switch to coffee
temperature setting =>
Setting the automatic electrical power supply cut-off (auto-off)
Appliances are
pre-set in the factory
to 1 hour.
It is possible to turn your
machine off automatically after
a number of pre-programmed
hours.
Press the steam key to switch
to automatic
cut-off setting =>
At each of these stages, you can memorise your settings by pressing the
want (the 4 lights flash 2 times) or carry on with the procedure. These settings will remain memorised even if the electrical
power is cut off. You can modify these settings at any time by repeating these operations.

SETTINGS

Press the 'Service' and
keys at the same
time.

Setting water hardness

The "water tank" light
will come on.
Setting the coffee temperature
The 'calc' light will
come on.
The 'clean' light will
come on.
The digital display for
parameter setting is
under the servicing
flap.
Press the key as many
times as are needed to select
the hardness level for the
water used.
Press the key as
many times as are
needed to select the
desired coffee temperature.
Press the key as
many times as are
needed to select the
desired duration.
button when you have reached the setting you
4
Look down vertically to
the bottom of the win-
dow
0 = very soft
1 = soft
2 = moderately hard
3 = hard
4 = very hard
2 3
1
1 = 1 H
2 = 2 H
3 = 3 H
4 = 4 H