Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
INDUSTRIAL SAFETY HELMET ACCORDING TO
EN 397, EN 50365
ANSI/ISEA Z89.1-2014 Type I Class G
SERIUS INDUSTRY
INFORMATION ON USE, SAFETY, LIFESPAN,
STORAGE AND CARE
This product is part of personal protective equipment
(PPE) and should be assigned to a specific person.
This manual contains important notes (Industrial
safety helmets according to EN 397 and ANSI/ISEA
Z89.1-2014 Type I Class G: additional control card
and test certificate). Before using this product, all
documents must have been read and their content
understood.
This document must be provided to the user by the
retailer in the respective country's language and
must be kept with the equipment while it is in use.
Instructions for use
These instructions must be carefully read and fol-
lowed.
This product has been manufactured especially for
working at heights and in depths and does not re-
lease the user from any personal liability.
Mountaineering, climbing and working at heights
and in depths often harbour hidden dangers and
risks caused by external influences. Risk of acci-
dents must never be excluded. In order to achieve
maximum safety when mountaineering, climbing and
working at heights and in depths, safe use of equip-
ment is only guaranteed if it complies with industrial
norms.
For more detailed and comprehensive information,
please refer to relevant special literature.
The following instructions are important to ensure
appropriate and correct use of the equipment. How-
ever, they cannot replace experience, responsible
behaviour and awareness of the risks inherent in
mountaineering, climbing and working at heights and
in depths and do not release the user from any per-
sonal responsibility. Use of the equipment is only
permitted to fit and experienced individuals or under
appropriate guidance and tuition.
Users must be aware that poor physical and mental
health can jeopardise safety under normal condi-
tions and in emergencies.
Before using the equipment, users must familiarise
themselves with safe and effective rescue proce-
dures.
The manufacturer cannot be held liable if the equip-
ment has been abused or used incorrectly.
All risks and responsibilities are borne by the user at
all times.
When using this product in the areas of rescuing and
personal protective equipment, we recommend that
the relevant national regulations be observed.
PRODUCT-SPECIFIC INFORMATION
Specification
This product meets obligatory requirements of High
Visibility according to ANSI/ISEA Z89.1-2014 Type I
Class G, if the product is labeled with HiVis.
Fitting
To provide safe protection, this helmet must be
adapted to the head size of the user. The safety
helmet must be adjusted to head size in such a way
so that it cannot shift or slip off when the chin strap
Werbung
