Videotec ULISSE IR360 Bedienungsanleitung Seite 22

For ULISSE units fitted with ZFI cameras, set the Int.
value under IR Probe, in the ZFI Camera Settings
menu ("9.6.3 ZFI camera settings menu", page 34).
ZFI CAMERA SETTINGS
------------------------
1>ZOOM
3 IR PROBE
4 ZONE TITLING
5 ZONE MASKING
Fig. 32
7.1.6.5 Infrared illuminator on from
keyboard
To switch on the infrared illuminator from the
keyboard:
• Adjustment of the illuminator on the left
(MASTER):
• Lighting threshold: Set the value to the
minimum ("7.1.6.6 Adjusting the illuminator trip
threshold", page 21).
• Infrared power: Set the value as needed
("7.1.6.7 Adjusting the illuminator power",
page 21).
20
: 30x
: INT.
>
>
• Adjustment of the the illuminator on the right
(SLAVE):
• Lighting threshold: Set the value to the
maximum ("7.1.6.6 Adjusting the illuminator trip
threshold", page 21).
• Infrared power: Set the value to the minimum
("7.1.6.7 Adjusting the illuminator power",
page 21).
• Set the Off value under IR Probe in the Main
menu > Block camera > Advanced > Infrared
menu ("9.6.6.10 Advanced setting menu (Infrared)",
page 43).
INFRARED
------------------------
1>IR PROBE
Fig. 33
To operate the infrared illuminator, refer to "11.9
Enabling the Infrared illuminator", page 58.
: OFF