Product Description And Type Designation; Product Markings; Checking The Markings - Videotec ULISSE IR360 Bedienungsanleitung

4 Identification
4.1 Product description and type
designation
ULISSE IR360 has been specifically created for
applications of day/night video surveillance in
external environments. This positioning system
integrates a high performance P&T head with
housing, telemetry receiver and a bracket for two
infrared LED illuminators (not included) without
external rotating cables.
The rotation on the horizontal axis is continuous with
a variable speed up to 40°/s while the amplitude on
the vertical axis varies from +90° to -40° with a max
speed of 30°/s. ULISSE IR360 controls the functions of
autopan and patrol with a tracking accuracy of 0.02°
on preset positions recall.
In addition to the OSD set-up, the system is equipped
with an RS232 interface allowing the possibility to
update to the latest firmware version. The positioning
system is controlled through a RS485/RS422. The
telemetry signal can be transmitted in an active way
for chain configuration of several ULISSE IR360 units
together. Multiple communication protocols are
embedded.
Available versions with block camera, with integrated
wiper and with integrated video server for IP control
of the PTZ functions.
The ULISSE IR360 is designed to work only with the
illuminators of the VIDEOTEC UPTIRN series.
The positioning unit can be used in: coast and border
patrol, harbour control, urban settings, highway and
traffic monitoring, stadiums, industries, prisons or
military applications, and perimeter surveillance.

Product markings

On the pan & tilt devices have a label complying with
CE markings.
Fig. 01
The label on the body shows:
• Model identification code (Extended 3/9 bar code)
• Power supply voltage (Volt)
• Frequency (Hertz)
• Absorbed current (Amps)
• IP weatherproof standard
• Serial number

4.1.1 Checking the markings

Before proceeding further with installation, make
sure the material supplied corresponds to the order
specification by examining the marking labels.
Never, under any circumstances, make any changes
or connections that are not described in this
handbook: the use of inappropriate appliances may
expose personnel and the system to serious safety
hazards.
9