Configuring Nic Teaming For Your Private Network Adapters - Dell PowerVault MD3000i Bedienungsanleitung

Configuring NIC Teaming for Your Private Network Adapters

NOTE:
TCP Offload Engine (TOE) functionality of a TOE-capable NIC is not
supported in this solution.
1 On node 1, identify two network adapters that will be used for
NIC teaming.
2 Connect an ethernet cable from each selected network adapter to
the private network switch.
3 If node 1 is configured with Broadcom NICs, go to step 4. If node 1 is
configured with Intel
following steps:
Right-click My Computer and select Manage.
a
On the Computer Management window, select Device Manager.
b
Expand the Network Adapters tab.
c
Right-click the Intel NIC, which is identified for NIC teaming
d
and select Properties.
Click the Teaming tab.
e
Select Team with other Adapters and then select New Team.
f
Specify a name for NIC team and click Next.
g
On the Select the adapters to include in this team box, select the
h
remaining network adapters that you identified for NIC teaming and
click Next.
On the Select a team mode list box, select Adaptive Load Balancing.
i
Click Finish to complete the teaming.
j
On the Team Properties window, click OK.
k
On the Intel NIC's Properties window, click OK.
l
Close the Computer Management window.
m
Configuring Network and Storage for Oracle RAC Database
®
NICs, configure NIC teaming by performing the
31