EFOY Pro 800 Bedienungsanleitung Seite 18

4. Configuring the Data Port
Test the EFOY connection by pressing the "Enter" key. The
EFOY unit will respond with the prompt
SFC>
If there is no response, the connection is incorrect. Check to
see whether the interface adapter is connected to the port
(Com) and whether the connection is active. You can modify
the settings in the menu "File\Properties" only after you close
the connection.
If you change the port, you must reconfigure the settings as
described above. You can open the appropriate menu by
clicking the "Configure" button.
15