Selecting next chapter/track
Selecting track directly
Accessing a section via menu
Repeating DVD-title/chapter
Stopping repeat
Selecting a section
to be repeated
05-DVD 4535 N AEG_GB.indd 49
Press the „I" button (Fig 3/12) to jump to the start of the next chapter
or track.
Enter the number of the desired chapter/track with the Numerical
Buttons on the remote control (Fig. 3/2).
Replay of the track starts after a short while.
The on-screen menu enables comfortable access to any sections of a
medium. To do this, proceed as follows
1. Press the GOTO-button (Fig. 3/34). The media specific menu is displa-
yed.
2. The menu shows an insertion mark (1). Use the Cursor Buttons (Fig.
3/30) to move it to the desired subject (e.g. „Chapter").
3. Now move to the point from which the replay should start. Depen-
ding on the type of medium this may be a track number, a chapter
or even a point in time. The input must be made with the Numerical
Buttons (Fig. 3/2).
4. Press the ENTER-button (Fig. 3/7) to start the replay from this point.
1. Choose the chapter or title to be repeated.
2. Press the REPEAT button (Fig. 3/23). The message
„REPEAT: [CHAPTER]" appears on the screen.
3. Press the REPEAT button again, until the message „REPEAT: [TITLE]"
is displayed.
Keep pressing the REPEAT-button (Fig. 3/23), until the message „REPEAT:
[OFF]" is displayed on screen.
You can define a freely selected section to be automatically repeated.
To do this, proceed as follows:
1. Mark the beginning of the section to be repeated. During repetition
press the button A-B (Fig. 3/24) on the remote control once. The
message „REPEAT A" appears on the screen.
2. Mark the end of the section to be repeated by pressing the A-B-
button on the remote control once again. The message „REPEAT
A-B" appears on the screen. The previously marked section is now
repeated.
Press the A-B-button again to stop the repetition.
NOTE:
On CDs/MP3 CDs the section to be repeated must be within a track.
English
49
17.07.2009 12:59:30 Uhr