Selection Of Concept Cooking Modes; Temperature Selection - Fagor ACG-061 Bedienungs- Und Wartungsanleitung

CONCEPT USE AND MAINTENANCE MANUAL
ENGLISH

SELECTION OF CONCEPT COOKING MODES

Use the mode 3 selector button.
 CONVECTION: The oven is only heated with hot air (dry heat).
 STEAM: The oven is heated using steam from the injection of water at 99ºC at
atmospheric pressure.
 MIXED: The oven is heated using a combination of hot air and steam.
 REGENERATION: The heating by hot air and steam at a time, but at higher
power to steam.
The fluepipe opens automatically in convection mode. In all other modes it remains
closed.

TEMPERATURE SELECTION

Use the temperature selection button (control 10) to select the required temperature in
the oven interior. This is displayed in window 9 (chamber temperature setting).
Window 8 shows the true value of the temperature in the chamber.
The temperature range and defect values for each operating mode are listed below:
 Convection: Range [20..300].
 Mixed: Range [20.0.250].
 Steam: Range [99].
3. Mode selector.
4. Convection mode indicator.
5. Mixed-mode indicator.
6. Regeneration mode indicator
7. Indicator steam mode.
REAL VALUE CAMERA
TEMPERATURE
CHAMBER TEMPERATURE
SETPOINT VALUE
TEMPERATURE
SELECTOR
22