Allocate Inputs And Outputs To The Measurement Channels - ECOLAB Versatronic Kurz- Betriebsanleitung

Unit description
3.3

Allocate inputs and outputs to the measurement channels

By default there is a fixed allocation of inputs and outputs (see the following mapping
tables) for this device.
This assignment can be changed as needed.
See operating instructions 417102269, chapter 'Configuration' .
Connection overview
3.3.1 Versatronic standard
Measuring channel Inputs and outputs Explanation
Ch. 1
Ch. 2
Ch. 3
Ch. 4
All channels
* Option board / ** If IN 7 is not assigned (no measuring module plugged in), the system automatically switches to IN 6.
417102279 Version 1-09.2019
Option boards
Base
IN 7 (IN 6) */** Ch. 1 input measurement signal
IN 4 Ch. 1 input temperature
IN 1 Ch. 1 release input
OUT 3 Ch. 1 controller output 1
OUT 14 * Ch. 1 controller output 2
OUT 4 Ch. 1 standard signal output
IN 8 * Ch. 2 input measurement signal
IN 5 Ch. 2 input temperature
IN 2 Ch. 2 release input
OUT 2 Ch. 2 controller output 1
OUT 15 * Ch. 2 controller output 2
OUT 5 Ch. 2 standard signal output
IN 9 * Ch. 3 input measurement signal
IN 11 * Ch. 3 input temperature
IN 3 Ch. 3 release input
OUT 12 * Ch. 3 controller output 1
OUT 16 * Ch. 3 standard signal output
IN 10 * Ch. 4 input measurement signal
IN 12 * Ch. 4 input temperature
IN 13 * Ch. 4 release input
OUT 13 * Ch. 4 controller output 1
OUT 18 * Ch. 4 standard signal output
OUT 1 Common alarm output for all channels
10