User Level - ECOLAB Versatronic Kurz- Betriebsanleitung

Device menu
9.3

User level

Users have a clear overview of the main parameters of the respective measurement and
control channel. This allows an easy and fast configuration.
The user level is only displayed in the device menu when a notification has
been performed previously by an operator or master.
(See
Open the entry dialogue by touching the display panel of a data point.
Fig. 12: Example of a user level view
9.3.1 Versatronic standard
Configuration
point
Ch. X name
Ch. X unit
(not with pH or ORP)
Ch. X type of
measurement
(Only pH and ORP)
Start ch. X Indicator
range
Ch. X end indicator
range
Ch. X Al1 alarm type
Ch. X Al1 limit
Ch. X Al2 Alarm Type *Inactive
Ch. X Al2 Threshold
Ch. X Cal.timer y / n
417102279 Version 1-09.2019
Ä Chapter 9.1 'Log-on / log-off' on page 32.)
Selection / option
Text box
mS/cm, µS/cm
(with Cr or Ci measurement)
or text field
(with a Cl, Cd, PA measurement)
* pH standard
pH antimony
pH ISFET
* Redox (ORP)
ammonia
* = Please select only the highlighted points
-99999 to 99999
-99999 to 99999
*Inactive
* Min. Alarm
* Max. alarm
Alarm window
Inverted alarm window
* = Please select only the highlighted points
-99999 to 99999
* Min. alarm
* Max. alarm
Alarm window
inverted Alarm window
* = Please select only the highlighted points
-99999 to 99999
Inactive active
Explanation
Channel. Edit X name
Select the unit
Choosing the type of
measurement
Set start of indicator range 0,0000
Set end of indicator range Cr measurement, Ci
Enable Alarm 1,
Set the alarm type
Set Alarm 1
threshold
Enable Alarm 2
Set the alarm type
Alarm 2 limit value setting 0,0000
Enable calibration timer
34
Default
Name
Cr measurement:
µS/cm
Ci measurement:
mS/cm
Cl measurement: mg/l
pH standard
measurement: 500,00
pH / ORP (redox)
measurement: 14,00
Cl, Cd, PA
measurement: 20,00
Inactive
0,0000
Inactive
Inactive