Roland Edirol StudioCanvas SD-80 Erste Schritte Seite 177

• Are the various volume settings of the SD-80 set appropriately?
The front panel of the SD-80 has separate knobs that adjust the MIDI volumes. Use the Volume
knob located on the front panel of the SD-80 to adjust the volume.
• Is your computer in Suspend or Sleep mode?
If so, get your computer to resume normal operation, then exit all applications that are using the
SD-80. Next, turn the SD-80's power off, then switch it on again.
• Did you reconnect the USB cable or turn the power of the SD-80 off and on?
Exit all applications that are using the SD-80, and turn the power of the SD-80 off and then on once
again.
• Is OMS/FreeMIDI set correctly?
As described in "Configuración de OMS"(pág. 167) or "Configuración de FreeMIDI"(pág. 170),
check the OMS or FreeMIDI settings. Also make sure that the device for MIDI IN/OUT is correctly
selected in the MIDI settings of your MIDI sequencer software.
• Does the PART level meter move in the SD-80 display?
If the PART level meter is moving but you do not hear sound, check whether the volume of the
SD-80 or your speakers has been lowered. If the PART level meter of the SD-80 is not moving,
recheck the connections and "Configuración de OMS"(pág. 167)/"Configuración de
FreeMIDI"(pág. 170).
• Is the OMS setup enabled?
If a diamond-shaped symbol is not displayed at the left edge of the title area in the OMS setup
window, the setup is not enabled. From the OMS File menu, choose "Enable setup".
("Configuración de OMS"(pág. 167))
• Has your computer been set to enter Sleep mode?
If your computer enters Sleep mode, exit the software you are using, and then restart your
computer. We recommend that you set your computer to not use Sleep mode.
Can't play back MIDI
• Has the MIDI device you are using been set correctly?
In order to record/play MIDI tracks using the SD-80, you must correctly install the SD-80 driver
("Instalación y configuración del controlador (Windows)"(pág. 149)). Also make sure that the
input port and output port are set as follows in your software.
INPUT port
EDIROL SD-80 MIDI IN 1
EDIROL SD-80 MIDI IN 2
OUTPUT port
EDIROL SD-80 PART A
EDIROL SD-80 PART B
Resolución de problemas
177