Roland Edirol StudioCanvas SD-80 Erste Schritte Seite 17

13
Set the SD-80's power switch to the ON position.
If the "File signature verification" setting was not set to "Ignore", a "Digital
Signature Not Found" dialog box will appear.
fig.2-16_30
If "File signature verification" is set to "Warn,"
1. Click [Yes].
2. Continue the installation.
If "File signature verification" is set to "Block"
1. Click [OK].
2. When the "Found New Hardware Wizard"
appears, click [Finish].
3. Perform the installation as described in the
"Troubleshooting" section on Device Manager
shows "?", "!", or "USB Composite Device"
(p. 35).
fig.2-17_30
14
The Insert Disk dialog box will
appear.
Click [OK].
fig.2-18_30
15
The Files Needed dialog box will
appear.
Input the following into the
"Copy files from" field, and click
[OK].
D:\Drivers\USB_XP2K
* The drive name "D:" may be different for your system. Specify the drive name of your
CD-ROM drive.
Installing & Setting Up the Driver (Windows)
17