Weekly Timer Operation - Toshiba RAS-B10J2FVG-E Bedienungsanleitung

WEEKLY TIMER OPERATION

23
How to set WEEKLY TIMER
1. Press
2. Press
The sequence of day symbol appears on the LCD.
3. Press
• The program 1 is ready for setting while
pressed PG-1 appears on the LCD.
• Press
the sequence program 1 to program 4.
4. Press
• The time can be set between 0:00 and 23:50 in
10 minute intervals.
• Press and hold the button to change setting time
for 1 hr.
• Only one of ON or OFF timer can be set on each
program.
ON timer display
*OFF timer is used to stop the air conditioner only.
The display does not show Operation mode,
Temperature, Fan speed and others.
5. Press
6. Press
• The temperature can be set between 17°C and 30°C.
7. Press
8. Add operations, if required.
• Press
(Notes: Fireplace cannot select and memorize in
weekly function)
• Press
• Press
• Press
• Press
9. Adding or editing the program.
The program can be set to perform on all the required
days until
If adding or editing a program is required, please
repeat steps 2 - 8 before setting confi rmation.
10. After adding or editing, press
setting*.
Weekly timer running
Next program
Timer ON or OFF
to enter WEEKLY TIMER setting.
Blink
to select desired day in sequence.
SU MO TU WE TH FR SA
WEEKLY SUMO
TUWETHFRSA
(All day)
to select the program number.
to change the program number in
PG-1
PG- 2
PG- 3
PG- 4
or to select the desired time.
OFF timer display*
to select desired operation.
or to select desired temperature.
to select the desired fan speed.
to use 8°C operation.
to use ECO operation.
to use Hi-POWER operation.
to use Silent operation.
FLOOR to use FLOOR operation.
is pressed to confi rm the setting 10.
to confi rm the
Operating Mode
Display after
pressing SET
button
Next operation Operating Temperature
time and Fan speed
*Point remote control at air conditioner receiving module
then, press SET button until you hear the "BeepBeep"
sound. This means the setting operation has been
completed. As the air conditioner is receiving the signal,
you will hear separate "Beep" sounds corresponding to
the number of days in the selected setting. An incomplete
setting is indicated if the TIMER lamp is blinking. Press
Notes :
1. Place the remote control where the indoor unit can
2. The ON/OFF timer can be set during the WEEKLY
3. During WEEKLY TIMER operation, all of operation
is
4. When the remote control is sending a signal to the air
Edit Weekly timer program
To edit the program after confi rming the weekly timer
setting, follow steps 1 - 3 below.
1. Press
2. Press
3. Press
Deactivating WEEKLY TIMER operation
Press
• The "WEEKLY" indicator will disappear from the
• The TIMER lamp goes off.
• To reactivate the WEEKLY TIMER operation,
To delete programs
The individual program
1. Press
2. Press
3. Press
4. Press
All programs
1. Press
2. Press
Notes :
Make sure the remote control receiving module on the air
conditioner receives the signal from the remote control.
twice.
receive the signal. This will increase the accuracy
of the timing between the remote control and the air
conditioning unit.
TIMER operation. In this situation, the air conditioner
will fi rst follow the normal timer until it is complete;
then, it will return to the WEEKLY TIMER function.
such as MODE, TEMP, FAN, Hi-POWER, ECO and
etc., can be adjusted but when the clock reaches the
program setting, the operation will return to the set
items in the program.
conditioner, avoid interference from objects that can
block the signal.
.
• The day of the week and the program number of the
current day will be displayed.
to select the day of the week and
press to select program number to be
confi rmed.
• Resetting the operation.
to exit confi rming mode.
while "WEEKLY" is displayed on the LCD.
LCD. However, the program will remain in the remote
control.
press again, LCD shows the next program.
The program after reactivation, is related to the clock
time.
.
• The day of the week and the program number is
displayed.
• Select the day to delete the program.
to select the program number to be
deleted.
.
• ON or OFF timer will be cleared and the LCD will
blink.
to delete the program.
• Press while the LCD is blinking.
The program has now been deleted.
.
• The day of the week and the program number will
be displayed.
and hold for 3 seconds.
• All programs will be deleted and LCD displays
current operation.