CAME F500 Installationsanleitung Seite 21

5a) - Assemble the articulated arm (A) onto the intermediate bush which is all in one with the ratiomotor shaft;
- using the hardware provided with the unit, install the bracket on the gate;
- make the electrical connection, supply voltage to the ratio-motor during closure and secure the arm with the M6 (B) grub screw;
- fi x the lower cap.
F500
5b) - Assemble the articulated arm (D) onto the intermediate bush which is all in one with the ratiomotor shaft;
- make the electrical connection, supply voltage to the ratio-motor during closure and secure the arm with the M6 (C) grub screws;
- fix the lower cap.
F510
A
B
ø 3,9 x 13
D
E
C
E
C