Troubleshooting Table - hanseatic HKS18560DA2I Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appliance yourself. This may
put your own and future users' lives at risk. Only authorised specialists are allowed to
carry out this repair work.
Possible cause
Problem
No electricity to socket.
Compressor off,
interior light off.
Mains plug is loose.
Appliance is switched off.
Compressor off,
interior light on.
Desired temperature has
been reached.
Temperature has been set
Appliance cools
too high.
too quickly.
Temperature has been set
The appliance
too low.
doesn't cool suffi-
ciently.
Door not tightly closed or
door seal is not completely
tight.
The appliance is near a heat
source.
Food has been stored warm. Only store cooled foods.
Too many goods frozen.
Ambient temperature is too
low or too high.
Compressor seems defec-
tive.
Troubleshooting table
Solutions, tips, explanations
Check the socket with another appliance.
Check the tightness of the mains plug.
Switch the appliance (see "Setting the tem-
perature" on page GB-13) on.
Further cooling not required. When the in-
side temperature rises, the compressor au-
tomatically switches on.
Select a lower setting (see "Setting the tem-
perature" on page GB-13).
Select a higher setting (see "Setting the tem-
perature" on page GB-13).
See (see "Checking and cleaning door
seals" on page GB-20).
Place insulation plate between the applianc-
es or change location.
Freeze a maximum of 2 kg at any one time.
Adjust the ambient temperature to the cli-
mate category (see "Technical specifica-
tions" on page GB-32).
Set the temperature to "
"Super Cool" function (
compressor does not switch on within an
hour, please contact our service centre (see
page GB-29).
Page GB-27
2
°c". Activate the
button). If the