Editing Surround Decoders/Sound Field Programs; Setting Sound Field Parameters; Sound Field Parameters - Yamaha RX-V765 Bedienungsanleitung

Editing surround decoders/sound field programs

Setting sound field parameters

Although the sound field programs would satisfy you as
they are with the default parameters, you can arrange
sound effect or decoders suitable for acoustical conditions
of sources or rooms by setting the parameters (sound field
elements).
y
• You can protect the sound field against the changes of parameters the
sound filed parameters when "Memory Guard" of the SETUP menu is set
to "On" (see page 52). To change the parameters, set it to "Off."
1
Turn on the video monitor connected to this
unit.
2
Press jSETUP on the remote control.
The SETUP menu appears on the monitor.
3
Press kCursor k / n to select "DSP
Parameter" and press kENTER.
The screen changes as follows.
Sound field program
MOVIE
Cursor
.
SUR.;;;;PLI
3D DSP;;;;;;;;;ON
DSP Level;;;;;0dB
P.Init.Dly;;;16ms
P.Room Size;;;1.0
S.Init.DLY;;;;2ms
[ ]/[ ]:Select

Sound field parameters

4
Press kCursor k / n to move "→" to the
sound field program and press kCursor
l / h to select the sound field program.
5
Press kCursor k / n to select the parameter
that you want to change, and press kCursor
l / h to change the parameter.
An asterisk (*) appears on the left of the sound field
parameter name displayed on the monitor when you
change the parameter from its default setting. For
details on functions and adjustable ranges of the
sound field parameters, see "Sound field parameters"
on this page.
y
• Repeat steps 4 and 5 to change other sound field program
parameters.
• A complete list of the parameters of some sound field programs
may exceed one page. In this case, press kCursor k / n to
scroll through pages.
42
En
1/2 Page number
Sci-Fi
I Movie
Set values
6
To end the edit, press jSETUP.
To initialize the parameters of the selected sound field
program, kCursor n repeatedly to select "Initialize"
and then press, kCursor h. When the confirmation
screen appears on the monitor, press kCursor h to
confirm the initialization or kCursor l to cancel it.
Sound field parameters
y
• The default settings are marked with "*."
CINEMA DSP basic parameters
SUR.
Choices: PLIIx Movie*/Neo:6 Cinema
Selects a surround decoder to be used with a sound field
program in the MOVIE category.
PLIIx Movie: Selects the Dolby Pro Logic IIx (Movie)
decoder.
Neo:6 Cinema: Selects the Neo:6 (Cinema) decoder.
Note
• Surround decoders cannot be changed when used with the following
MOVIE sound field programs.
– Mono Movie
– Sports
– Action Game
– Roleplaying Game
3D DSP
On*/Off
Choices:
When CINEMA DSP 3D is enabled, sets whether to use
sound field programs in CINEMA DSP 3D mode.
Note
• When the presence speakers are not used, the 3D DSP parameters are not
displayed.
DSP Level
Adjustable range: -6 dB to 0 dB* to +3 dB
Fine adjusts an effect level (level of the sound field effect
to be added). You can adjust the level of the sound field
effect while checking sound levels. Adjust "DSP Level" as
follows.
• The effect sound is too soft.
• There is no difference in effects between the sound field
programs.
→Increase the effect level.
• The sound is dull.
• The sound field effect is added too much.
→Reduce the effect level.