Assembly; Unpacking - Fakir trend TS 121 Bedienungsanleitung

Unpacking

Assembly

1
2
3
4
12
Assembly
Unpack the appliance and check the contents for
completeness (see „Scope of delivery"). If you detect
a damage from transport, contact your retail dealer
immediately.
NOTICE!
Keep the packaging for storage and future transports
(e.g. for moves, service).
WARNING!
Never use a defective appliance.
1. Vacuum hose
Press the connecting piece at the end of the
vacuum hose into the air intake opening of the
vacuum cleaner. To remove it, press on both but-
tons and release the latches.
2. Vacuum hose / telescopic tube
Insert the handle of the vacuum hose into the
telescopic tube until a "click" is heard. The handle
is set now. To remove the handle, press the but-
ton, and pull the handle out of telescopic tube.
3. Nozzles / handle tube or telescopic tube
Insert the nozzle you require to the handle on
the vacuum hose or to the telescopic tube (Floor
nozzle until a slight "click" is heard. The nozzle is
set now. To remove the nozzle, press button, and
remove the nozzle out of telescopic tube or the
handle.)
4. Setting the length of the vacuum tube
Use your thumb to press the slider in the direction
of the arrow. Pull or push the vacuum tube to the
required length.
Now the appliance is ready to use.