Yamaha RX-V1900 Bedienungsanleitung Seite 12

Quick start guide
Step 3: Turn on the power and start
playback
Check the type of the connected speakers.
If the speakers are 6-ohm speakers, set "SPEAKER
IMP." to "6Ω MIN" before using this unit (page 25).
You can also use 4-ohm speakers as the front speakers
(page 93).
1
Turn on the video monitor connected to this
unit.
Press A MASTER ON/OFF inward to the ON
2
position on the front panel.
Rotate the C INPUT selector to set the input
3
source to "DVD".
4
Start playback of the desired DVD on your
player.
Rotate Q VOLUME to adjust the volume.
5
8
En
6
To set this unit to the standby mode, press B
MAIN ZONE ON/OFF.
y
For details about turning on/off this unit and the standby
mode, see pages 25.
■ For other operations
• Optimizing the speaker parameters
automatically
• Basic playback operations
• Sound field programs
• Pure high-fidelity sounds
• FM/AM radio tuning
• iPod playback
• Bluetooth component playback
• USB content playback
☞ P. 29
☞ P. 34
☞ P. 38
☞ P. 45
☞ P. 46
☞ P. 52
☞ P. 54
☞ P. 55