Control Board - Futurelight OCC-36 K2 3W RGB IP65 Bedienungsanleitung

Control Board

The Control Board offers several features: you can e. g. simply set the starting address.
The main menu is accessed by pressing the Enter-button. Browse through the menu by pressing Up or
Down. Press the Enter-button in order to select the desired menu. You can change the selection by pressing
Up or Down. Confirm every selection by pressing the Enter-button. You can leave every mode by pressing
the Esc-button. The functions provided are described in the following sections.
Default settings shaded.
Main
Sub menu
menu
ADDR
CHAN
SLAV
CNTL
BLAC
COLR
CHS1
CHS2
CHS3
CHS4
CHS5
CHS6
CHS7
CHS8
DIMR
LODA
VER
Display
AXXX (1-512)
3 CH
4 CH
6 CH
ON/OFF
MAST
ALON
RED RXXX
GREN GXXX
BLUE BXXX
STRB SXXX
SPED XXX
FADE XXX
STRB XXX
SPED XXX
FADE XXX
STRB XXX
SPED XXX
FADE XXX
STRB XXX
SPED XXX
FADE XXX
STRB XXX
SPED XXX
FADE XXX
STRB XXX
SPED XXX
FADE XXX
STRB XXX
SPED XXX
FADE XXX
STRB XXX
SPED XXX
FADE XXX
STRB XXX
MOD1
MOD2
VX.X
26/30
Function
DMX address setting
3 channel mode
4 channel mode
6 channel mode
Set unit to slave
Automatic Program Run as Master
Automatic Program Run in Stand Alone
Blackout
Set red LED value
Set green LED value
Set blue LED value
Set strobe value
Set running speed value
Set fade value
Set strobe value
Set running speed value
Set fade value
Set strobe value
Set running speed value
Set fade value
Set strobe value
Set running speed value
Set fade value
Set strobe value
Set running speed value
Set fade value
Set strobe value
Set running speed value
Set fade value
Set strobe value
Set running speed value
Set fade value
Set strobe value
Set running speed value
Set fade value
Set strobe value
Standard dimming option
Linear dimming option
Restore factory settings
Software version of each IC
00035996.DOC, Version 1.0