Master/Slave-Operation; Dmx-Controlled Operation; Dmx Mode (3 Optional Modes) - Futurelight OCC-36 K2 3W RGB IP65 Bedienungsanleitung

CHAS
• Press [UP] or [DN] to enter the main menu "CHAS"
• Press [ENTER] and select the desired sub menu by pressing [UP] or [DN].
• Press [ENTER] for selecting the desired sub menu.
Internal Program
With the function "CHS1-8" you can run the internal programs. You can set the program speed
under „SPED"; the fading time under „FADE" and the strobe-effect under „STRB" to a value
between 0 (1) and 255.
OTHE
• Press [UP] or [DN] to enter the main menu "OTHE".
• Press [ENTER] and select the desired sub menu by pressing [UP] or [DN].
• Press [ENTER] for selecting the desired sub menu.
Dimming LEDs
With this function, you can adjust the dimming mode.
• Select "DIMR" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [UP] to select "MOD1" or "MOD2".
• Press [ENTER] to confirm.
• Press [ESC] in order to return to the main menu.
Restore factory settings
With the function "LODA" you can restore the factory settings of the device.
Software version
With this function you can display the software version of the device.
• Select "VER" by pressing [UP] or [DN].
• Press the enter-button, the display shows "V-X.X", "X.X" stands for the version number, e.g. "V-
1.0", "V-2.6".
• Press the Esc-button in order to return to the main menu.

Master/Slave-operation

The master/slave-operation enables that several devices can be synchronized and controlled by one master-
device.
On the rear panel of the OCC-36 K2 3W RGB IP65 you can find an jack (DMX Out) and an plug (DMX In),
which can be used for connecting several devices.
Choose the device which is to control the effects. This device then works as master-device and controls all
other slave-devices, which are to be connected to the master-device via a balanced microphone lead.
Connect the DMX OUT-jack with the DMX IN-plug of the next device.

DMX-controlled operation

You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
The OCC-36 K2 3W RGB IP65 has 3 DMX-modes.

DMX mode (3 optional modes)

6 channel mode (red, green and blue can be controlled alone)
CH CH CH
1 2 3
red green blue
CH CH
4 5
Preset Program Strobe
CH
6
Dimming
28/30 00035996.DOC, Version 1.0