Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product Selection, Project Engineering and Modification
EN
8118/132, 8118/134
EN
Rated operational
EN
current [A]
EN
3
EN
6
EN
10
EN
16
EN
20
25
EN
25
EN
50
EN
*) Each inserted conductor and each internal connection conductor counts as a conductor.
EN
Jumpers and protective conductors do not count.
EN
**) When using this table of values, simultaneity factors or load factors must be taken into
account according to IEC 439. A mixed assembly with electrical circuits of different cross
EN
sections and currents is possible with proportional utilisation of the different tables of values.
EN
EN
Example calculation (8118/122):
EN
Cross-section [mm
EN
1.5
2.5
EN
EN
EN
EN
5.3.2 Additional Terminals
EN
Fitting of additional terminals by R. STAHL
EN
Forward the following information to R. STAHL:
EN
- Type
- Manufacturer
- Data sheet
- Number
- Enclosure size
R. STAHL
• will check whether the terminal type, number, cross section and current load correspond
with the approval
• will check whether the enclosure size and drilled holes are sufficient
• will install the terminals
• will, if necessary, create required drilled holes and fit required cable entries
• will update the order documentation
• will carry out a routine test
• will, if necessary, fit a new rating plate if the technical data, such as current or conductor
cross-section, has changed.
14
Terminal Boxes
Series 8118/1, Series 8118/2
Max. number of conductors*) for conductor cross-section
2
1.5 mm
2.5 mm
36 **)
any
36 **)
36 **)
26 **)
36 **)
6 **)
18 **)
–
6 **)
–
–
–
–
–
–
2
] Current [A]
10
16
2
2
4 mm
6 mm
any
any
any
any
32 **)
any
32 **)
24 **)
22 **)
24 **)
8 **)
24 **)
–
6 **)
–
–
Number of conductors Proportion
10 (of 16)
4 (of 12)
2
2
10 mm
any
any
any
any
20 **)
20 **)
20 **)
4 **)
= 63 %
= 33 %
= 96 % < 100 %
133285 / 8118609300
2019-11-13·BA00·III·en·06
Werbung
Kapitel
Inhaltsverzeichnis
