Checking The Battery Charge Level; Changing Tools; Torque Selection Ring/Drill Setting; 2-Speed Gearbox - Parkside PABS 20-Li D5 Originalbetriebsanleitung

Checking the battery charge level

♦ To check the battery status, press the battery
charge level button
remaining charge is shown on the battery
display LED as follows:
GREEN/RED/ORANGE = maximum charge/
performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery

Changing tools

Your cordless screwdriver has a fully automatic
spindle lock .
When the motor is at a standstill, the drive train is
locked so that you can open the drill chuck
turning it . After you have inserted the desired
tool and clamped it by turning the drill chuck
you can resume working immediately (see fig. F).
The spindle lock is released automatically when
the motor is started (by pressing the ON/OFF
switch ).

Torque selection ring/drill setting

You can set the torque using the torque preselec-
tion ring (see fig. G).
♦ Select a low level for small screws or soft
materials.
♦ Select a high level for large screws, hard
materials or for removing screws.
♦ For drilling operations, select the drill setting by
moving the torque preselection ring
position.

2-speed gearbox

CAUTION!
► Operate the speed selector switch
when the appliance is at a standstill. Other-
wise the appliance could be damaged.
In first gear (speed selector switch
position 1)
you can reach a speed of approx. 400 rpm and
a high torque. This setting is suitable for all screw-
driving jobs.
│ GB │ MT
■ 36
(see fig. E). The status/
by
,
to the
only
in
In second gear (speed selector switch
position 2)
you can reach a speed of approx. 1400 rpm for
carrying out drilling work.

Changing cutter knife blade

♦ Break the blunt section of the blade off at the
defined breaking point using a pair of pliers.

Use

Switching on/off
Switching on
♦ Press and hold the ON/OFF switch
up the appliance.
The LED work light
OFF switch is pressed slightly or fully, and
illuminates the working area in low light condi-
tions.
Switching off
♦ Release the ON/OFF switch
appliance.

Setting the rotational speed

The ON/OFF switch
trol. Pressing the ON/OFF switch
speed. Increasing the pressure increases the speed.
NOTE
► The integrated motor brake ensures that the
appliance stops quickly.

Changing the direction of rotation

♦ Change the direction of rotation by pushing the
rotation direction switch
in
to start
lights up when the ON/
to switch off the
has a variable speed con-
yields a low
to the right or left.
PABS 20-Li D5