Carl Valentin FLEXICODE Schnellreferenzhandbuch Seite 117

Key:
Codepage
Key:
External parameters
Key:
Buzzer
Display
Key:
Language
Key:
Keyboard layout
Key:
Customized entry
Key:
Hotstart
Key:
Autoload
Key:
Layout confirmation
Indication of the font used in the direct print module. The following possibilities are available:
ANSI character set / Codepage 437 / Codepage 850 / GEM German / GEM English / GEM
French / GEM Swedish / GEM Danish.
Layout dimension only: The parameters for layout length, gap length and layout width can be
transferred to the printing system. All other parameter settings are to be made directly at the
printing system.
On: Sending parameters such as print speed and contrast via our layout creation software to
the direct print module. Parameters which are set directly at the direct print module before are
no longer considered.
Off: Only settings made directly at the direct prin module are considered.
On: An acoustic signal is audible when pressing a key.
Value range: 1 ... 7.
Off: No signal is audible.
Setting of display contrast.
Value range: 45 ... 75.
Selection of language in which you want to display the text in the display.
At the moment the following languages are available: German, English, French, Spanish,
Finnish, Czech, Portuguese, Dutch, Italian, Danish, Polish, Greek, Hungarian, Russian, Chinese
(option), Ukrainian, Turkish, Swedish, Norwegian.
Selection of region for the desired keyboard layout.
The following possibilities are available: Germany, England, France, Greece, Spain, Sweden
and US.
Off: No question appears at the display. In this case the stored default value is printed.
On: The question referring the customized variable appears once before the print start at the
display.
Auto: The questions referring the customized variable and the quantity query appear after every
printed layout.
Auto without quantity query: The question referring the customized variable appears after
every layout without additional query for the quantity.
On: Continue an interrupted print order after switching on the module anew.
(Only if module is equipped with option Compact Flash card)
Off: After switching off the direct print module the complete data is lost.
On: A layout which was loaded once from Compact Flash card can be loaded again
automatically after a restart of direct print module.
The last loaded layout from CF card is always again loaded after a restart of direct print module.
Off: After a restart of direct print module the last used layout must be again loaded manually
from the memory card.
A common use of the functions Autoload and Hotstart is not possible.
On: A new print order is only printed after confirmation at the device.
An already active continuing print order is printed as long as the confirmation is effected at the
device.
Off: No query appears at the display of control unit.
English
Flexicode
117