Christopeit Sport TM 5000 S Montage- Und Bedienungsanleitung Seite 31

Press key to stop the treadmill. Continue Exercising by press
standby mode.
Manually Progams
In standby mode, directly press
forward from 0. Press and
the performance.
Operation of counter mode:
Press the" "Mode key to enter the countdown mode, and continue to press the button to select the cycle countdown mode of time calorie com-
pletion and manual modes. Select one of the three counter modes and press the start key, the treadmill will start running after "3, 2, 1, GO". Speed and
incline can be adjusted by pressing
and enter the pause. If you want to continue running, press
to stop the exercise, press
standby state.
key to manual mode. The treadmill will start running at the lowest speed and incline, and other windows count
key to change incline and speed. When you finish or pause the running, the system will automatically calculate
and during operation. During running, if you want to pause, please press
key in the pause state, and the system will automatically calculate the performance of the exercise, and then enter the
Time window
. Repress, the system can calculate the sports achievements, then enter
key, and the treadmill will continue running at the lowest speed and incline. If you want
Target window:
When entering the counter mode, the manual mode will switch to
the target window, and the target value will be displayed next to the
target.:
For example, the countdown time is 5 minutes. The progress bar
shows the percentage of the movement completed at 40%.
u Forward timing:
Display the running time, the display range is from 0:00 to 18:00h,
when the timing reaches the maximum, reset the forward timing, the
treadmill will not stop.
u Countdown mode:
Press" "key to the "Time", window to display"15:00"and when it
flashes, it indicates entering the time counter mode.
s The time setting range is: 5:00 -- 99.00 minutes;
s The default setting time of the treadmill decreases from 15:00 to
zero.
u Forward timing: display the running distance, the display range is
from 0.00 to 99.9km. When the count reaches the maximum, clear the
zero and count forward again. The treadmill will not stop.
u Distance counting mode:
Distance
Press the "
window
"1.00"and flashes, it indicates entering the distance counter mode.
s The distance setting range is: 0.5 -- 99.9 km;
s The default value of the treadmill is reduced from 1.00km to zero.
u forward timing : the calories consumed are displayed, ranging from
0 to 999 kcal. When the count reaches the maximum, clear the zero
and count forward again. The treadmill will not stop.
u Calorie counting mode:
Calories
Press the " "key repeatly, and when the "Calories"window show
window
"50.0"and flashes, it indicates entering the calorie counter mode.
s Distance setting range: 10.0 -- 999.0 calories;
s The default value of the treadmill is reduced from 50.0 Kcal to zero.
31
key to slow down
"key repeatly, when the "Distance "window show