Indiglo ® Night-Light - Timex DIGITAL Benutzerhandbuch

EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from date
of purchase for $5... You can pay with AMEX, Discover, Visa or MasterCard by
calling 1 800-448-4639 during normal business hours... Payment must be made
within 30 days of purchase... Name, address, telephone number, purchase date,
and 5-digit model number required... You can also mail a check for $5 to: Timex
Extended Warranty, P...O... Box 1676, Dept... EF, Little Rock, AR 72203...
Please read instructions carefully to understand how to operate your Timex
watch... Your model may not have all of the features described in this
booklet.
FEATURES AND BASIC OPERATION
1... Date with MM-DD format (month/day)
2... 24-Hour Stopwatch with Lap or Split Time
3... 10-Lap Memory Recall
4... Daily Alarm and Hourly Chime
5... INDIGLO night-light
®
SET/INDIGLO
®
BUTTON (DONE)
MODE
(NEXT STEP)
Button functions shown with setting functions in parentheses.
TIME
To set time and date...
1... From Time of Day mode, press and hold SET/INDIGLO... The Seconds can
be seen flashing.
2... Press SPL/RST to set Seconds to zero adding one minute if seconds are
"30" or greater...
3... Press MODE to set Minutes, as indicated by its flashing. Press ST/STP
to advance or SPL/RST to reverse the Minutes setting... Press and hold to
increment quickly...
4... Press MODE to set Hours, as indicated by its flashing. Press ST/STP
to advance or SPL/RST to reverse the Hours setting... Press and hold to
increment quickly...
Note: 12-Hour time has an "A" indicator in the morning and a "P" indicator
after Noon... 24-Hour time has no indicator...
5... Press MODE to set the Month number, as indicated by its flashing. Press
ST/STP to advance or SPL/RST to reverse the Month setting... Press and
hold to increment quickly...
6... Press MODE to set the Date, as indicated by its flashing. Press ST/STP
to advance or SPL/RST to reverse the Date setting... Press and hold to
increment quickly...
7... Press MODE to set the Day, as indicated by its flashing. Press ST/STP
to advance or SPL/RST to reverse the Day setting... Press and hold to
increment quickly...
8... Press SET/INDIGLO to exit Time Set...
Note: Switching between 12- and 24-Hour time can be done by pressing
SPL/RST in time mode...
STOPWATCH
Use this function for timing events...
1... Press MODE until the timing screen appears...
2... With the stopwatch reset, press and hold SET/INDIGLO to select LAP or
3... Press ST/STP to start timing...
4... With the stopwatch running, press SPL/RST to record a Lap or Split time...
®
5... Press SPL/RST to record another Lap or Split time...
6... Press ST/STP to pause the timing...
7... Either press ST/STP to resume timing, or press SPL/RST to reset the
ST/STP
(INCREASE VALUE)
10-LAP RECALL
1... Press MODE until "RECALL" appears...
SPL/RST
2... Press ST/SPL (forward) or SPL/RST (reverse) to review the last 10
(DECREASE VALUE)
ALARM
To turn on/off or to set a Daily alarm, or to turn on/off an hourly chime.
1... Press MODE until "AL" appears...
2... Press ST/STP repeatedly to turn on/off the Alarm
3... To Set the Alarm, press SET/INDIGLO. The Hours digit flashes.
4... Press ST/STP to advance or SPL/RST to reverse the Hours setting... Press
5... Press MODE to set the Minutes as indicated by its flashing. Press ST/STP
6... Press SET/INDIGLO to exit the Alarm Set... The Alarm ON
7... When the alarm sounds, press ANY button to silence the alert, or it will stop
INDIGLO
Press INDIGLO
Electroluminescent technology used in the INDIGLO
watch face at night and in low light conditions...
WATER AND SHOCK RESISTANCE
If your watch is water-resistant, meter marking or (O) is indicated...
Water-Resistance Depth
*pounds per square inch absolute
WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY
BUTTONS UNDER WATER.
1... Watch is water-resistant only as long as lens, push buttons and case remain
2... Watch is not a diver watch and should not be used for diving...
3... Rinse watch with fresh water after exposure to salt water...
4... Shock-resistance will be indicated on watch face or caseback... Watches are
1
SPLIT timing... See the chart below for explanation of each...
The stopwatch will show the Lap Number and last recorded Lap of Split
time...
Stopwatch to zero...
LAP 1 = 7.11 LAP 2 = 7.50
SPLIT 1 = 7.11
SPLIT 2 = 15.01
Lap/Split times recorded with the Lap Number...
Note: Total time is shown in the upper display with the Lap as "_ _"...
or both...
and hold to increment quickly...
Note: The Hours will be presented in the same format (12- or 24-hour time)
as the time setting...
to advance or SPL/RST to reverse the Minutes setting... Press and hold to
increment quickly...
automatically in about 20 seconds...
Note: Unless deactivated, the alarm will sound the next day...
NIGHT-LIGHT
®
button to illuminate watch display for 2-3 seconds...
®
30m/98ft
50m/164ft
100m/328ft
intact...
designed to pass ISO test for shock-resistance... However, care should be
taken to avoid damaging crystal/lens...
ENGLISH 04V-096000
LAP 3 = 7.08 LAP 4 = 7.30
SPLIT 3 = 22.09
SPLIT 4 = 29.39
or the Hourly Chime
lights...
night-light illuminates
®
p.s.i.a. * Water Pressure Below Surface
60
86
160