Troubleshooting The Engine; Troubleshooting The Machine - Ingersoll-Rand BXR-100H Betriebs- Und Wartungsanweisungen

TROUBLESHOOTING THE ENGINE

Table 1
PROBLEM
Engine fails to start.
Engine runs irregularly.

TROUBLESHOOTING THE MACHINE

Table 2
PROBLEM
Machine fails to vibrate.
Travelling is bad or the vibration
is reduced.
CAUSE
Spark plug is defective.
Air in the fuel system.
Fuel tank is empty.
Carburator is clogged.
Excessive fuel.
Fuel line sucks air.
Air cleaner is clogged.
Engine stalls during operation.
Low compression.
CAUSE
Incorrect setting RPM of engine.
Throttle cable is slack.
Centrifugal clutch is slipping.
Belt is slipping.
Incorrect setting RPM of engine.
Air cleaner is clogged.
Centrifugal clutch is slipping.
Belt is slipping.
CORRECTION
Clean or replace.
Bleed air completely.
Fill Tank.
Clean or replace, if necessary.
Open fuel drain cock and drain fuel. Clean spark plug.
Retighten the fuel pipe joints and bleed air.
Clean air cleaner or replace element.
Clean fuel system and retighten the fuel pipe joints.
Replace head gasket or retighten spark plug.
CORRECTION
Adjust.
Adjust.
Overhaul or replace If necessary.
Adjust or replace, if necessary.
Adjust.
Clean air cleaner or replace element.
Overhaul or replace If necessary.
Adjust or replace, if necessary.
BXR-100H Reversible Plate Compactors
15-EN Operation & Maintenance Manual
EN