Order Data - Gemü 695 Original Einbau- Und Montageanleitung

6

Order data

Body configuration
2/2-way body
Connection
Butt weld spigots
Spigots DIN
Spigots EN 10357 series B
(formerly DIN 11850 series 1)
Spigot EN 10357 series A
(formerly DIN 11850 series 2) / DIN 11866 series A
Spigots DIN 11850 series 3
Spigots JIS-G 3447
Spigots JIS-G 3459
Spigots SMS 3008
Spigots BS 4825 Part 1
Spigot ASME BPE / DIN 11866 series C
Spigot ISO 1127 / EN 10357 series C /
DIN 11866 series B
Spigots ANSI/ASME B36.19M Schedule 10s
Spigots ANSI/ASME B36.19M Schedule 40s
Threaded connections
Threaded sockets DIN ISO 228
Threaded sockets NPT
Threaded spigots DIN 11851
One side threaded spigot, other side
cone spigot and union nut, DIN 11851
Aseptic unions on request
Flanges
Flanges EN 1092 / PN16 / form B,
length EN 558, series 1,
ISO 5752, basic series 1
Flanges ANSI Class 150 RF,
length MSS SP-88
Flanges ANSI Class 125/150 RF,
length EN 558, series 1,
ISO 5752, basic series 1
Clamp connections
Clamps ASME BPE for pipe ASME BPE,
length ASME BPE
Clamps DIN 32676 series B for pipe EN ISO 1127,
length EN 558, series 7
Clamps ASME BPE for pipe ASME BPE,
length EN 558, series 7
Clamps DIN 32676 series A for pipe DIN 11850,
length EN 558, series 7
Clamps SMS 3017 for pipe SMS 3008,
length EN 558, series 7
Aseptic clamps on request
695
Code
Valve body material
D
EN-GJL-250, (GG 25) (Cast iron)
EN-GJS-400-18-LT (S.G. Iron 40.3), PFA lined
EN-GJS-400-18-LT (S.G. Iron 40.3), PP lined
Code
1.4435, investment casting
1.4408, investment casting
0
1.4408, PFA lined
16
1.4435 (316L), forged body
1.4435 (BN2), forged body Δ Fe<0.5%
17
EN-GJS-400-18-LT (S.G. Iron 40.3),
18
hard rubber lined
35
1.4539, forged body
36
37
Diaphragm material
55
59
NBR
FPM
60
EPDM
63
EPDM
65
EPDM
1
EPDM
31
PTFE/EPDM convex, PTFE loose
6
PTFE/EPDM, PTFE lamin.
Material complies with FDA requirements, except codes 2, 4 and 14
62
The combination of PFA lining with 5E diaphragms is only
conditionally suitable for gaseous media. If low seat leakage rates
are required for gaseous media, other combinations are preferable.
Control function
8
Normally closed
38 Normally open
Double acting
39
Actuator size
Diaphragm size 25
80
Diaphragm size 40
Diaphragm size 50
82
88
8A
8E
24 / 40
Code
Code
Code
(NC)
(NO)
(DA)
Code
8
17
18
C3
37
39
40
42
83
F4
2
4
13
14
17
36
5E
52
1
2
3
1/N
2/N
3/N