Maintenance; Transportation, Storage And Disposal; Technical Data - Husqvarna DT600 Bedienungsanleitung

Note: It is both tiring and unnecessary to lift or hold
the moss dethatcher above the surface when
working.
Introduction
Below you will find some general maintenance
instructions. If you need further information please
contact your service workshop.
To perform maintenance on the
attachment
CAUTION: Much work on the moss
dethatcher is often done in dusty conditions.
If you have a gasoline operated product, it is
extremely important that the air filter is
inspected regularly, often daily, and oiled in
order to work satisfactorily.
Refer to the operator's manual of the power
unit for maintenance instructions.
WARNING: Always wear protective gloves
when you perform maintenance on the
attachment.
Transport and storage
If transporting the attachment on another vehicle always
use approved securing devices and make sure that the
attachment is securely held.
Technical data for gasoline operated products
Moss dethatcher
Width, mm
8

Maintenance

Transportation, storage and disposal

Technical data

2. Keep an acute working angle to the surface. With a
large working angle, the moss dethatcher tends to
move towards you and you risk losing control of the
product.
WARNING: The gear housing gets hot when
the product has been in use. To avoid
burning yourself do not touch the gear
housing.
1. Make sure that the moss dethatcher does not rotate
when the power/thottle trigger is released.
2. Clean the wheels if they are not rotating freely.
Ensure the attachment is cleaned and that a complete
service is carried out before long-term storage.
DT600
556
743 - 002 - 13.12.2019