LEGRAND Lexic Bedienungsanleitung Seite 6

3. Setting actual date and summer-/ winter
changeover
Button MENU activates the menu.
Select SET TIME... with button and
confirm with button OK . Select DATE...
with button and confirm with
OK
button .
Set year with buttons and
OK
confirm with button .
Set day and month with buttons
and confirm with button OK .
Summer-/winter changeover
Summer- / winter changeover can be made manually or auto-
matically if set.
Choose the region of summer-/winter
(see table below) with buttons .
Confirm with button OK .
If manual changeover is required choose nonE during the date
input. Automatic changeover depends on your country / area.
Choose the appropriate setting for your country / area.
Beginning of End of
Choice summertime summertime
last Sunday last Sunday
Euro
in March in October
last Sunday last Sunday
Gb
in March in October
1 ST Sunday last Sunday
US
in April in October
No No
nonE
changeover changeover
Freely programmable date with regard to the
change from summer time to winter time
Nothern hemisphere
Put in the date at which the summer time starts
and ends at your location/in your country. The
weekday is automatically allocated to the date.
Southern hemisphere
On the southern hemisphere the date at which the
summer time starts/ends must be programmed for
the same year.
Set year with buttons and
confirm with button OK .
Set actual day and month
of summertime with
buttons and confirm with button
Set actual day and month
of real time with buttons
and confirm with button OK .
4. Setting switching times
Button MENU activates the menu. Confirm PROG... with button
Confirm PROG NEW... with button
SET
DATE
D/M/Y
Select desired day with buttons
confirm with button
If chosen day already contains a program,
the program and Clr will be displayed.
SET
DATE To delete the program confirm with button
D/M/Y
With button the setting can be copied to the next day
(see copying switching times).
Set ON time with buttons
confirm with button
SET
DATE
SU/Wi
Advice:
Setting advances in minutes.
Press once = 1 minute
Hold button = higher speed
Set OFF time with buttons
confirm with button
Further settings can be executed as described
Country /
area above.
A maximum of 8 ON and OFF times can be set per day.
EU
Up to the 7th OFF time the settings for one
day have to be confirmed again with
GB
button OK .
only North
Copying switching times
America
Call up the copy function with button
Select the day on which you will copy the
setting times with buttons
Confirm selection with button
For further days repeat operation.
Terminating program input
Press button MENU as required until the
actual time appears.
5. Delete switching times
MENU
Button activates the menu. Confirm PROG... with button
Confirm PROG NEW... with button
OK .
Select desired day with buttons
confirm with button
To delete program press button
New program can be set now (see §4).
If this day does not contain any program press button
Press button MENU as required until the actual time appears.
OK
.
PROG NEW
and
24
OK
.
18 6
1234567
12
OK .
PROG NEW OFF
24
and
18
OK . 6
1234567
12
PROG NEW
24
and
18 6
OK
.
1234567
12
PROG NEW
24
18
6
1234567
12
PROG NEW
.
24
18 6
.
1234567
12
PROG NEW
24
OK .
18 6
1234567
12
24
18 6
1234567
12
OK .
PROG NEW
and
24
OK .
18 6
1234567
OK .
12
OK twice.
6. Check switching times
OK .
Button MENU activates the menu. Confirm PROG... with button
Select TIME CHECK... with button
button OK . Select desired day with buttons
ON
confirm with button OK .
With button OK check setting times one
after another.
Free storage locations will be
displayed with FrEE.
Terminating check switching times
MENU
Press button as required until the
actual time appears.
ON
7. Hand ON/OFF
Select hand symbol with
button
State of contact set by program
will be reversed.
= ON
= OFF
The next program automatically returns the switch to ON or
OFF as programmed.
8. Continuous switching
Select with button
the symbol for continuous
override ON
or continuous override OFF
Terminating continuous switching
Select symbol with button symbol
OK
.
operation.
Mains failure
Mains failure will be displayed by no U.
Buttons are inoperative.
Reset is possible.
OK .
and confirm with
and
TIME CHECK ON
24
18 6
1234567
12
24
18 6
1234567
12
24
18
6
1234567
12
24
18 6
1234567
12
24
18 6
1234567
12
for automatic