Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cleaning the housing
■
Wipe the housing with a damp cloth . For stub-
born soiling use a mild detergent on the cloth .
Wipe off any detergent residue using a cloth
moistened with clean water . Then dry the
appliance carefully .
Cleaning the accessories
■
Clean the mixing bowl 6, the lid 9, the filling
accessory 8 and the kneading hook 0, the
whisk q and the beater w in warm water with
a little washing-up liquid . Any residues can be
removed with a washing-up brush . Rinse all
parts with warm clean water and make sure that
all parts are dry before re-using them .
NOTE
►
The mixing bowl 6 is also suitable for
cleaning in a dishwasher .
Storage
■
Wind the power cable 4 around the cable
retainer on the underside of the appliance .
■
Store the cleaned appliance in a clean, dust-free
and dry location .
KM 600 A1
Troubleshooting
If the appliance suddenly stops working:
■
The appliance has overheated and triggered the
automatic safety cut-out .
–
Turn the rotary switch 3 to "OFF" .
–
Remove the plug from the wall socket .
–
Allow the appliance to cool for 15 minutes .
–
If the appliance has not yet cooled off com-
pletely after 15 minutes, it will not start .
–
Wait a further 15 minutes and try switching
on again .
If the appliance cannot be switched on.
–
Check that the plug is correctly connected to
a wall socket .
–
Check whether the swivel arm 1 is in the
correct position .
Technical data
Input voltage:
Power consumption: 600 W
Protection class:
Max . capacity
Mixing bowl 6:
All parts of this appliance which come into
contact with food are food-safe .
We recommend the following operating times:
When working with the kneading hook 0, whisk q
or beater w, allow the appliance to cool down
after 10 minutes of operation .
If you exceed this operating time, the appliance
can overheat and be damaged!
220 - 240 V ~ ,
(alternating current)
50 - 60 Hz
II
(double insulation)
approx . 5 l
│
GB│IE│NI
7
■
Werbung
Kapitel
Inhaltsverzeichnis
