Magnifi Cation Changer - Leica DMI3000B Bedienungsanleitung

8.11 Magnifi cation Changer
Leica DMI3000 B:
A mechanical magnifi cation changer can be
used optionally.
Magnifi cation factor: 1.6x.
A slider switches between 1x and the magnifi ca-
tion factor. The mechanical magnifi cation chang-
er affects the eyepieces and the top port.
Leica DMI4000 B and Leica DMI6000 B:
A mechanical magnifi cation changer can be
used optionally. The following magnifi cation fac-
tors are available: 1.5x, 1.6x and 2x
A slider switches between 1x and the magnifi ca-
tion factor.
The mechanical magnifi cation changer affects
the eyepieces and the top port.
The selected factor is shown in the LeicaDisplay
or the relevant window of the Leica Application
Suite (LAS) and taken into account when calcu-
lating the total magnifi cation.
Fig. 117 Front control panel
1 Function buttons for magnifi cation changer
1
Leica DMI4000 B and Leica DMI6000 B:
A motorized magnifi cation changer can be used
optionally. The following magnifi cation factors
may be selected: 1.5x, 1.6x, or 2x
The selected factor is displayed on the LeicaS-
creen and in the relevant fi eld of the Leica Ap-
plication Suite (LAS), and is taken into account
when calculating the total magnifi cation.
The motorized magnifi cation changer affects all
ports.
Pressing the left button (117.1) switches between
the possible magnifi cation factors; pressing the
right button selects the factor 1x.
Note:
a microscope can not have both types (manual
and motorized) of magnifi cation changers.
Change magnifi cation via
1
fi xed function buttons on stand
Leica Application Suite (LAS) Software
8. Operation
103