English (Original Instructions) - DeWalt D25810 Bersetzt Von Den Originalanweisungen

HEAVY-DUTY CHIPPING HAMMER
D25810, D25811
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
(U.K & Ireland only)
Type
Frequency
Power Input
No-load beats per minute
Single impact energy (EPTA 05/2009)
Tool holder
Collar diameter
Weight (including handle)
Noise and vibration total values (triax vector sum) according to EN60745-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Chiselling
Vibration emission value a
h ,Cheq
Uncertainty K =
The vibration and/or noise
information sheet has been measured in accordance with
a standardised test given in
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for
work patterns.
WALT one of the
e
D25810
V 230
AC
V 230/115
AC
1
Hz 50
W 1050
bpm 3150
J 7.1
SDS-Max 17mm-HEX
mm 76
kg 5.6
dB(A) 94
dB(A) 105
dB(A) 3
= m/s² 8.5
m/s² 1.5
emission level given in this
EN62841 and may be used to
vibration and/or noise
vibration and/or
vibration and/
vibration), organisation of
EC-Declaration of Conformity
Machinery Directive
Heavy-Duty Chipping Hammer
D25810, D25811
D25811
D WALT declares that these products described under
230
e
Technical Data are in compliance with:
230/115
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
1
2000/14/EC, Electrical concrete breaker (hand-held), m ≤ 15 kg,
50
Annex VIII, TÜV Rheinland LGA Products GmbH (0197), D-90431
1050
Nürnberg, Germany, Notified Body ID No.: 0197.
3150
Level of sound power according to 2000/14/EC (Article 12,
7.1 Annex III, No. 10; m ≤ 15 kg):
L (measured sound power level)
WA
76
L (guaranteed sound power level)
WA
5.7
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
94
The undersigned is responsible for compilation of the technical
105
file and makes this declaration on behalf of D
3
8.5
Markus Rompel
1.5
Vice President of Engineering PTE Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
24.10.2018
WARNING: To reduce the risk of injury, read the
instruction manual.
emission
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
EngLIsH
dB 100
dB 103
WALT at
e
WALT.
e
15