English (Original Instructions); Ec Declaration Of Conformity - DeWalt XR LI-ION DCH735 Bersetzung Der Originalbetriebsanleitung

EnGLIsh
HEAVY-DUTY CORDLESS SDS MAX COMBINATION HAMMER
DCH735, DCH775
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
No-load speed
No-load beats per minute
Single impact energy (EPTA 05/2009)
Optimum drilling range into concrete
Maximum drilling range in concrete
Maximum core drilling range in
concrete
Bit holder
Chisel positions
Wireless Tool Control Transmitter
Frequency Band
Max. Power (EIRP)
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN IEC 62841-2-6:
L (emission sound pressure level) dB(A)
PA
L (sound power level)
WA
K (uncertainty for the given
sound level)
Drilling
Vibration emission value a
h, HD
Uncertainty K =
Chiselling
Vibration emission value a
h ,Cheq
Uncertainty K =
* Measured at the side handle. Side handle vibration is higher than vibration at
the main handle.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN IEC 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
28
WALT one of the
e
DCH735 DCH775
V 54
DC
1
min -1 177–355 145–290
bpm 1350–2705 1105–2210
J 13.3
mm 25–38
mm 48
mm 40–125
SDS max® SDS max®
24
MHz 433
mW 0.03
kg 8.5
99
dB(A) 107
dB(A) 3
= m/s² 8.8
m/s² 1.5
= m/s² 9.5
m/s² 1.5
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
54
EC‑Declaration of Conformity
1
Machinery Directive and Radio Equipment
Directive
19.4
28–42
52
Heavy‑Duty Cordless SDS max® Combination
40–150
Hammer
DCH735, DCH775
D WALT declares that these products described under Technical
e
24
Data are in compliance with:
2006/42/EC, EN62841-1:2015+A11:2022, EN IEC 62841-2-6:2020
433
+ A11:2020.
0.03
These products also comply with Directive 2014/53/EU and
9.4
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
99
file and makes this declaration on behalf of D
107
3
Markus Rompel
Vice-President Engineering, PTE-Europe
13.5
D WALT, Richard-Klinger-Straße 11,
e
1.5
65510, Idstein, Germany
30.12.2022
10.8
DECLARATION OF CONFORMITY
1.5
THE SUPPLY OF MACHINERY (SAFETY)
Heavy‑Duty Cordless SDS max®
D WALT declares that these products described under Technical
e
Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
REGULATIONS 2008
Combination Hammer
DCH735, DCH775
WALT at
e
WALT.
e