Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User Manual
56
MODSTER Charger 60
This screen shows the external and internal
temperature.
The battery is on the cyclic process of charge
and discharge can often become warm after
charge or discharge period. The program can
insert a time delay to occur after each charge
and discharge process to allow the battery
adequate time to cool down before being
subjected to the next process. The value ranges
from 1 to 60 minutes.
This program is for NiMH/NiCd battery only.
When the charger detects the delta peak value
reaches the value you set, the charger will say
the battery is fully charged.
The beep sounds at every time pressing the
buttons to confirm your action. The beep or
melody sounded at various times during
operation to alert different mode changes.
These audible sounds can be on or off.
Press the Start/Enter button for 3 more than
seconds to load the factory set.
This screen shows the version.
www.modster.at
Werbung
Inhaltsverzeichnis
