Cleaning And Storage - Silvercrest SHLF 2000 D1 Bedienungs- Und Sicherheitshinweise

The use of extension cords is not
recommended. If the use of an
extension cord is necessary, it
must be designed for a current
flow of at least
Shield the product, power cord
and plug from dust, direct sunlight
and dripping and splashing
water.
Protect the product from heat. Do
not place the product in direct
proximity to open flames or heat
sources such as heaters, ovens or
stoves.
Protect the power cord from
damage. Do not allow it to hang
over sharp corners; do not crush
or bend it. Keep the power cord
away from any hot surfaces and
open flames. Make sure that no
one may accidentally pull on it or
trip over it.
Regularly check power plug and
power cord for damages.
10 A.
Do not operate the product if the
power cord or power plug are
damaged, if the product does not
work or is damaged in any way.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
Do not operate the product with
wet hands or while standing on a
wet floor. Do not touch the power
plug with wet hands.
Always turn off the product
before disconnecting it from the
power supply.
Do not unplug the product by
pulling on the power cord. Do not
wrap the power cord around the
product.

Cleaning and storage

Disconnect the product from the
wall outlet during periods of
disuse and before cleaning.
GB 11