Sample Measurement - VOLTCRAFT PHT-600 Bedienungsanleitung

12. Sample Measurement

• Press to turn the power on.
Press
temperature (if needed).The adjustment
will show on the display beside "MTC".
• Dip the pH electrode into the sample solution.
The glass membrane (10) should be immersed.
• Gently stir until a stable reading can be obtained.
• The pH will show on the display (A).
• When finished or between measurements
of different samples, rinse the electrode with
distilled water and blot it dry.
Put the soaker bottle (11) back on.
•
32
/ to manually adjust the