Herunterladen Inhalt Inhalt Diese Seite drucken

Bluetooth Trademarks; Information On Radio Certification - Fronius RC Pedal TIG/BT Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Bluetooth trade-
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
marks
Inc. and any use of such marks by Fronius International GmbH is under license. Other
trademarks and trade names are those of their respective owners.
Information on ra-
The RC Pedal TIG /BT remote control is fitted with a wireless module.
dio certification
In the USA, wireless modules are subject to FCC certification:
FCC
This wireless module is subject to Part 15 of the FCC Code of Federal Regulations. Its use
is subject to the following conditions:
(1) This device must not cause any interferences and
(2) The device must be able to cope with any interference, including that which could ad-
versely affect the operation of the module.
FCC ID: QOQBLE121LR
Industry Canada RSS
This device complies with the Industry Canada licence-exempt RSS standards. Its use is
subject to the following conditions:
(1) This device must not cause any interferences and
(2) The device must be able to cope with any interference, including that which could ad-
versely affect the operation of the module.
IC: 5123A-BGTBLE121LR
Unless expressly stated by the manufacturer, changes or modifications to the wireless
module are not permitted and will invalidate the user's operating license for the device.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules.
These limit values are intended to provide an adequate level of protection against harmful
emissions when the device is used in an industrial environment. This device generates and
uses high-frequency energy and may also radiate this energy. If the device is not installed
and used according to the Operating Instructions, this could potentially lead to dangerous
interference of the wireless communication system. Operation of this equipment in a resi-
dential area is likely to cause harmful interference, in which case users will be required to
correct the interference at their own expense.
22
NOTE!

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rc pedal tig/tmc

Inhaltsverzeichnis