13 Sp Delay Time; 14 Display Set; 15 Memory Guard - Yamaha RX-V800RDS Bedienungsanleitung

SET MENU

13 SP DELAY TIME

Use this feature to adjust the delay of the center channel
sound. This feature works when this unit decodes a Dolby
Digital or DTS signal. Ideally, the center speaker should
be the same distance from the listening position as the left
and right main speakers. However, in most home
situations, the center speaker is placed in line with the
main speakers. By delaying the sound from the center
speaker, the apparent distance from the center speaker to
the listening position can be adjusted to make it seem the
same as the distance between the left and right main
speakers to the listening position. Adjusting the delay
time for the center speaker is especially important for
giving depth to the dialog.
Control range (ms): 0 to 5
Center speaker image
C
L
C
RL
y
• Increasing the delay by 1 ms simulates moving the speakers
about 30 cm (one foot) farther away from the listening position.
46
R
RR

14 DISPLAY SET

I BLUE BACK > AUTO/OFF
You can set the OSD background to blue if the video
source is not being reproduced (or the power of the source
component is off).
I OSD SHIFT (OSD off-set position)
This setting is used to adjust the vertical position of the
OSD.
I DIMMER
You can adjust the brightness of the front panel display.

15 MEMORY GUARD

Use this feature to prevent accidental changes to DSP
program parameter values and other settings on this unit.
Choices: ON, OFF
Initial setting: OFF
Select ON to protect the following features:
• DSP program parameters
• All SET MENU items
• Center, rear speakers and subwoofer levels
• The on-screen display (OSD) mode
Notes
• When "15 MEMORY GUARD" is set to ON, you cannot use
the test tone.
• When "15 MEMORY GUARD" is set to ON, you cannot select
any other SET MENU items.