Selecting A Sound Field Program - Yamaha RX-V800RDS Bedienungsanleitung

BASIC PLAYBACK

Selecting a Sound Field Program

You can enhance your listening experience by selecting a
DSP program. For details about each program, see pages
57 to 60.
STANDBY
/ON
PRESET/
A/B/C/D/E TUNING
TUNER
SPEAKERS BASS PROCESSOR
A B EXTENSION DIRECT
EFFECT PROGRAM
ON OFF
DSP
2
1
2
1
Press DSP on the remote
control.
The indicator lights up for
about 3 seconds.
y
• If the selector dial is set to the DSP/TUN position, skip this
step.
28
INPUT VOLUME
INPUT MODE
D I G I T A L
D I G I T A L
SURROUND
PRESET TUNING RDS MODE
/TUNING FM/AM MEMORY MODE /FREQ EON PTY SEEK BASS TREBLE
EDIT MAN'L/AUTO FM AUTO/MAN'L MONO MODE START
L AUDIO R OPTICAL
PHONES S VIDEO VIDEO
– + –
SILENT VIDEO AUX
Remote control
2
Use the numeric buttons to select the
desired program before the indicator goes
off (or press PROGRAM l / h repeatedly on
the front panel).
• For example, to select the sub-program
"Spectacle", press MOVIE THEATER 1
repeatedly.
6CH INPUT
• The name of the selected program appears on the
front panel display and on the video monitor.
+
PROGRAM
Front panel
Program group
VIRTUAL VIRTUAL
DTS MOVIE THEATER 1
DIGITAL
PRO LOGIC
DSP
6.1/ES
SP
PCM
A B
Notes
• Choose a DSP program based on your listening preference, and
not on the name of the program. The acoustics of your listening
room affect the DSP program. Minimize the sound reflections
in your room to maximize the effect created by the program.
• When you select an input source, this unit automatically selects
the last DSP program used with that source.
• When you set this unit in the standby mode, the current source
and DSP program are memorized and are automatically
selected when you turn on the power again.
• If a Dolby Digital or DTS signal is input when the input mode
is set to AUTO, the DSP program automatically switches to the
appropriate decoding program.
• When a monaural source is being played with PRO LOGIC/
Normal or PRO LOGIC/ENHANCED, no sound will be heard
from the main speakers and the rear speakers. Sound can only
be heard from the center speaker. However, if "1A CENTER
SP" on the SET MENU is set to NONE, the center channel
sound is output from the main speakers.
• When a source connected to the 6CH INPUT jacks of this unit
is selected, the digital sound field processor cannot be used.
• When 96-kHz sampling digital signals are input to this unit, the
DSP program cannot be selected. In this case, the sound is
reproduced as normal 2-channel stereo.
or
Remote control
PS PTY RT CT
2
PTY HOLD EON STEREO AUTO VOLUME
D-TV/LD
ZONE 2
NEWS INFO AFFAIRS SPORT
MEMORY TUNED SLEEP
CBL/SAT
VCR2/DVR
dB
ms
Program name (sub-program)
DVD
MD/TAPE
CD-R
VCR 1 TUNER
CD
V-AUX PHONO