Mode?le Notice COCOON 1:Mise en page 1
U U s s e e
1 TO OPEN THE LID :
Push the button backwards then open the lid from the front towards the
fig 2
back.
To close the lid, press it down firmly.
2 PLACE THE BASE ON a clean, flat, stable, heat resistant surface, away
from sources of heat and water splashes.
3 FILL THE KETTLE WITH THE DESIRED AMOUNT OF WATER.
4 POSITION THE KETTLE ON ITS BASE. PLUG IT INTO THE MAINS
SOCKET.
5 TO START THE KETTLE
Press the on/off button positioned at-the bottom of the handle, the red
indicator light on the front of the kettle will light up.
6 THE KETTLE WILL SWITCH OFF AUTOMATICALLY
as soon as the water reaches boiling point. You can stop it manually, by
removing it from its base to pour the water.
Throw away the water from the first two/three uses as it may contain dust.
Rinse the kettle and the filter separately.
7 SELECTING THE KEEP WARM FUNCTION
You can keep your water warm with the Keep warm function.
After switching on your kettle (red indicator light lit), press the KEEP WARM
button firmly, and the KEEP WARM indicator light will turn white.
Once the kettle has boiled, the red indicator light will be automatically
extinguished and the orange indicator light will light up to indicate that
the KEEP WARM function is activated for one hour.
After one hour, the kettle will switch itself off automatically and the KEEP
WARM function will stop working.
The KEEP WARM mode may be stopped at any time:
- by pressing the KEEP WARM button
- by removing the kettle from its base.
The user can reactivate the KEEP WARM mode once the kettle has been
placed back onto its base by pressing the KEEP WARM button again. Then
only the white KEEP WARM indicator light is lit.
The water must be boiled before the KEEP WARM mode can be selected. The
kettle must be boiled every time that more cold water is added to the kettle to
be able to reactivate the KEEP WARM mode.
8
27/05/08
13:29
fig 4
0,3L
Page 8
You can fill it through the
spout, which ensures
better maintenance of
the filter. For a minimum
amount of watercover
the bottom of the kettle)
with water.
fig 3
Never fill the kettle when
it is on its base.
Do not fill it above the
maximum level. If the
kettle is too full, boiling
water may spill out.
Do not use without
water.
Check that the lid is
closed properly
before use.
Only use the kettle for
boiling water.
D
D
w
To
•
•
•
Em
To
So