Recording A Source On Tape, Md Or Video Cassette - Yamaha RX-V396RDS Bedienungsanleitung

RECORDING A SOURCE ON TAPE, MD OR VIDEO CASSETTE

Recording adjustments and other operations are performed
from the tape deck, MD recorder or VCR. Refer to the
instructions for these components.
– + – +
2
1
Set VOLUME to the "m"
position.
2
Select the source you want to record.
Front panel
3
Begin recording by the tape deck, MD recorder
or VCR connected to this unit.
4
Play the source and then turn up the volume to
confirm the input source.
Front panel
30
2
L R
4
Front panel
or
Remote control
or
Remote control
y
If a tape deck or MD recorder is being used for recording, you can
monitor the sounds being recorded by pressing TAPE/MD MON /
1,4
EXT. DECODER (or TAPE/MD).
Notes
• The DSP program and the setting of VOLUME, BASS, TREBLE
and BALANCE have no effect on the material being recorded.
• A source connected to this unit only through the digital terminals
cannot be recorded by the tape deck, MD recorder or VCR
connected to this unit.
• A source connected to the EXTERNAL DECODER INPUT
terminals of this unit cannot be recorded.
• Check the copyright laws in your country to record from records,
CDs, radio, etc. Recording of copyrighted material may infringe
copyright laws.
If you play back a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.