Connecting An Audio Component; Connecting To An External Decoder - Yamaha RX-V396RDS Bedienungsanleitung

CONNECTIONS

Connecting an Audio Component

L R L
OUTPUT
Tape deck or
CD player
MD recorder

Connecting to an External Decoder

External decoder
MAIN SURROUND
OUT OUT
L R L R
12
(U.S.A. model)
R L R
LINE OUT LINE IN
CENTER SUBWOOFER
OUT OUT
(U.S.A.
model)
Be sure to connect the right channel (R), left channel (L),
input (IN) and output (OUT) properly.
Analog signal
L
R
Signal flow
This unit has additional 6-channel audio signal input
terminals for connecting an external decoder to this unit.
Connect the 6-channel audio signal output terminals of the
decoder to the EXTERNAL DECODER INPUT terminals
of this unit.
Notes
• When a source connected to these terminals is selected, the digital
sound field processor cannot be used.
• The settings of "CENTER SP", "REAR SP", "MAIN SP" and
"BASS OUT" in the SET MENU have no effect on a source
connected to these terminals. The setting of "MAIN LVL" is
effective. (Refer to pages 32 and 33 for details.)